Ready Remote 24921 Guía de instalación descargar pdf (Pagina 16)

Remote Control Programming

1. Turn key to the ON position

2. Within 5 seconds, press and release

Control button one time.

3. Within 5 seconds, press and hold the Control button. The LED will

ﬂash one time to conﬁrm entry into remote programming.

4. Press the button on the remote control.

5. The LED ﬂashes to conﬁrm the remote has been programmed.

6. Release the Control button, and turn the key to the Off position.

7. The LED turns on solid for a while to conﬁrm that remote program-

ming has been exited.

The programming routine exits if any of the following occurs:

• The ignition is turned off

• There is no activity for 30 seconds

• The Control button is pressed too many times

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Sin comentarios

Ready Remote 24921 Guía de instalación Pagina 16