Ready Remote 24927 Guía de instalación descargar pdf (Pagina 52)

Programming System Settings

Many of the features and operations of this system can be changed

to suit most of today's vehicle electrical systems. The program-

ming routine and feature menus that follow will allow making the

changes required for most vehicle installations.

System programming routine:

Accessing a Menu:

1. Turn the ignition ON and then OFF in less than 5 seconds

2. Within 3 seconds, Press/Hold the Momentary switch

3. After 2 seconds, the LED will flash and the Horn/Siren

will pulse to indicate the available menus. It will toggle

through the outputs until a menu is chosen.

a. Menu 1: 1 LED flash and 1 Horn/Siren pulse

b. Menu 2: 2 LED flashes and 2 Horn/Siren pulses

4. Release the Momentary switch after the appropriate

output in order to access that Menu. The LED and

Horn/Siren outputs will cease.

Accessing a Feature Location:

1. Press and release (do not hold) the Momentary switch

the same number of times as the feature location to be

accessed. See the Feature Chart for locations.

2. After 2 seconds the LED will flash (the number of flashes

will match with the feature location) to confirm the

feature location. It will flash/pause and repeat until the

feature is changed or programming is exited.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 94 95

Sin comentarios

Ready Remote 24927 Guía de instalación Pagina 52